Allied Telesis AT-S63 - Manual (Page 52)

Chapter 3: SNMPv1 and SNMPv2c
52 Section I: Basic Operations
Creating New SNMPv1 and SNMPv2c Community Strings
To create an SNMPv1 and SNMPv2c community string:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv1 & SNMPv2c section, click the Configure button to
display the SNMPv1 & SNMPv2c Communities tab, shown in
Figure 12.
Figure 12. SNMPv1 & SNMPv2c Communities Tab
The tab displays the following information.
Table 7. SNMPv1 & SNMPv2c Communities Tab
Column Definition
Community Name The name of a community string.
Access Mode The access mode of a community string.
A string with a Read Only access mode
can be used to view the MIB objects on
the stack, but not change their values. A
string with a Read/Write access mode can
be used to view and change the SNMP
MIB objects.