Allied Telesis AT-S63 - Manual (Page 170)

Chapter 11: SNMPv3
170 Section III: SNMPv3
6. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
Deleting an
SNMPv3
Community
Table Entry
To delete an entry from the SNMPv3 Community Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for Configure
Community Table and the Configure button to display the SNMPv3
Community Table tab in Figure 59 on page 168.
4. Click the radio button of the SNMPv3 Community Table entry you want
to delete and the Remove button.
5. At the confirmation prompt, click the OK button.
6. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
Modifying an
SNMPv3
Community
Table Entry
To modify an entry in the SNMPv3 Community Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for the Configure
Community Table, and the Configure button to display the SNMPv3
Community Table tab in Figure 59 on page 168.
4. Click the radio button of the SNMPv3 Community Table entry you want
to change and then click the Modify button to display the Modify
SNMPv3 Community window. An example of the window is shown in
Figure 61.