Allied Telesis AT-S63 - Manual (Page 172)

Chapter 11: SNMPv3
172 Section III: SNMPv3
Displaying the SNMPv3 Tables
This section contains procedures to display the SNMPv3 Tables. The
following procedures are provided:
 “Displaying the User Table Entries,” next
 “Displaying the View Table Entries” on page 173
 “Displaying the Access Table Entries” on page 174
 “Displaying the SecurityToGroup Table Entries” on page 175
 “Displaying the Notify Table Entries” on page 176
 “Displaying the Target Address Table Entries” on page 177
 “Displaying the Target Parameters Table Entries” on page 178
 “Displaying the SNMPv3 Community Table Entries” on page 179
Displaying the
User Table
Entries
To display the entries in the SNMPv3 User Table:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 14 on page 58.
3. In the SNMPv3 section, click the radio button for View User Table and
the View button to display the SNMPv3 User Table tab in Figure 62.
The parameters that define the user table entries are described in
Table 22 on page 135.
Figure 62. SNMPv3 User Table Tab (Monitoring)