Allied Telesis AT-S63 - Manual (Page 145)

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 145
Figure 45. Add New SNMPv3 Access Window
5. Configure the parameters, described in Table 24, for the new entry and
click the Apply button.
Table 24. SNMPv3 Access Table Parameters
Parameter Description
Group Name A descriptive name for the group of up to 32 alphanumeric
characters. You are not required to enter a unique value here
because the SNMPv3 Access Table entry is indexed with the
Group Name, Security Model, and Security Level parameter
values. However, unique group names allow you to more easily
distinguish the difference groups.
There are four default values for this field:
 defaultV1GroupReadOnly
 defaultV1GroupReadWrite
 defaultV2cGroupReadOnly
 defaultV2cGroupReadWrite
These values are reserved for SNMPv1 and SNMPv2c
implementations.
Context Prefix This parameter is preset to null. It cannot be changed.