Allied Telesis AT-S63 - Manual (Page 240)

Chapter 14: 802.1x Port-based Network Access Control
240 Section VI: Port Security
Displaying the RADIUS Accounting Settings
To display the RADIUS accounting settings:
1. From the Home page, click the Monitoring button.
2. From the Configuration menu, click the Network Security button to
display the 802.1x Port Access tab shown in Figure 85 on page 222.
The information in the RADIUS Accounting section of the tab is
described in this table.
Table 45. 802.1x Port Access Tab (Monitoring)
Parameter Definition
Accounting The status of RADIUS accounting, either
Enabled or Disabled.
Trigger Type The action that causes the switch to send
accounting information to the RADIUS
server. The possible settings are:
Start_Stop - The switch sends accounting
information whenever a client logs on or
logs off the network. This is the default.
Stop - The switch sends accounting
information only when a client logs off.
Port Number The UDP port for RADIUS accounting.
Type The type of RADIUS accounting. The
default is Network.
Accounting Update Whether or not the switch sends interim
accounting updates to the RADIUS
server. The options are Enabled or
Disabled.
Update Interval The intervals, in seconds, at which the
switch sends interim accounting updates
to the RADIUS server.