Table 22: snmpv3 user entry parameters, Figure 39 – Allied Telesis AT-S63 User Manual
Page 135

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3
135
Figure 39. Add New SNMPv3 User Page
5. Configure the parameters, described in Table 22, for the new entry and
click the Apply button.
Table 22. SNMPv3 User Entry Parameters
Parameter
Description
User Name
A descriptive name of up to 32 alphanumeric characters for the
user.
Authentication Protocol
The user’s authentication protocol. The possible values are:
M-MD5
This value represents the MD5 authentication protocol. Users
(SNMP entities) are authenticated with the MD5 authentication
protocol after a message is received. This algorithm generates
the message digest. The user is authenticated when the
authentication protocol checks the message digest. With the
MD5 selection, you can configure a Privacy Protocol.
S-SHA - This value represents the SHA authentication
protocol. With this selection, users are authenticated with the
SHA authentication protocol after a message is received. This
algorithm generates the message digest. The user is
authenticated when the authentication protocol checks the
message digest. With the SHA selection, you can configure a
Privacy Protocol.