Allied Telesis AT-S63 - Manual (Page 215)

AT-S63 Management Software Web Browser User’s Guide
Secton V: Virtual LANs 215
6. Use the stack ID pull-down menu in the switch image to select the ID
number of a switch that has ports you want to add or remove from the
VLAN, and click the Apply button. (If the switch is already displayed,
skip this step.)
7. In the switch image click the ports you want to add or remove from the
VLAN. Clicking a port toggles it through the settings in Table 39.
8. Click the Apply button.
9. To add or remove ports from the VLAN from other switches in the
stack, repeat this procedure starting with step 3.
10. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
Table 39. Port Settings in a VLAN
Setting Definition
The port is an untagged member of the
VLAN.
The port is a tagged member of the VLAN.
The port is not a member of the VLAN.