Allied Telesis AT-S63 - Manual (Page 54)

Chapter 3: SNMPv1 and SNMPv2c
54 Section I: Basic Operations
Figure 13. Add New SNMPv1 & SNMPv2c Community Page
5. Configure the parameters, described in Table 8, as needed.
Table 8. SNMPv1 and SNMPv2c Community Parameters
Parameter Definition
Community Name Specifies the community string. The name
can be up to 32 alphanumeric characters.
Spaces and special characters (such as /,
#, or &) are not permitted.
Status Enables or disables the community string.
A disabled community string cannot be
used to manage a stack. The default is
enabled.