Modifying snmpv1 and snmpv2c communities – Allied Telesis AT-S63 User Manual
Page 56

Chapter 3: SNMPv1 and SNMPv2c
56
Section I: Basic Operations
Modifying SNMPv1 and SNMPv2c Communities
To modify an SNMPv1 and SNMPv2c community string:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button.
3. Select the SNMP tab, shown in Figure 11 on page 50.
4. In the SNMPv1 & SNMPv2c section, click the Configure button to
display the SNMPv1 & SNMPv2c Communities tab, shown in Figure
12 on page 52.
5. Click the radio button of the community name you want to modify and
click the Modify button. You can modify only one community string at
a time.
The settings of the selected SNMP community string are displayed in
the Modify SNMPv1 & SNMPv2c Community page.
6. Modify the parameters as needed. The parameters are described in
Table 8 on page 54. The community name of a string cannot be
changed.
7. Click the Apply button to activate your changes.
8. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.