Samsung SM-T237PZWASPR - Manual (Page 78)

Settings 70
 WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other
equipment.
 WPN PIN entry: (Not configurable) View the PIN used by your tablet to set up a PIN-secured
connection to a Wi-Fi router or other equipment.
 Help: Get help using Wi-Fi.
Hotspot
Use your tablet as an Internet Access Point (AP) using Hotspot. This allows other devices (maximum of 8)
to connect to the AP via a Wi-Fi network
—giving the connected devices access to the Internet.
Connect a Device
1. Press and then touch Apps > Settings > Connections tab > Hotspot.
2. Touch the ON/OFF switch to enable Sprint
hotspot.
3. On the target device, activate Wi-Fi. Then scan for Wi-Fi hotspots. Select the name of your table
to connect.
4. On your tablet, follow the prompts to connect the target device.
Bluetooth Settings
Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number
of Bluetooth devices, such as headsets and hands -free car kits, and Bluetooth-enabled handhelds,
computers, printers, and wireless devices.
For more information about using Bluetooth, see Bluetooth .
1. Press and then touch Apps > Settings > Connections tab > Bluetooth.
2. Touch the ON/OFF switch to turn Bluetooth on. Bluetooth must be on to configure settings.
3. From the Bluetooth screen, configure these settings:
 Touch your tablet’s name to enable or disable visibility to other Bluetooth devices. When your
tablet is visible, other devices can find your tablet during a Bluetooth scan. Your tablet
remains visible for the period of time set in the Visibility timeout setting.
 Touch a paired device to connect to it, or touch beside a device to change its settings.
 Touch for more settings:
• Visibility timeout: Set the length of time your tablet is visible to other devices when you
turn on visibility.
• Received files: View files transferred to your tablet via Bluetooth.