Samsung SPH-L520ZWASPR - Manual (Page 170)

Driving Mode
When enabled, alarm and scheduled alarm information is read aloud.
1. Press and then touch > Settings > My device tab > Driving mode.
2. Touch OFF/ON to enable the setting and configure options:
 Incoming call: Read out callers’ information when receiving incoming calls.
 Message: Read out senders’ information when new messages arrive.
 Alarm: Read out alarm information when alarms sound.
 Schedule: Read out scheduled alarm information when alarms sound.
Power Saving Mode
Configure Power saving mode settings to conserve battery power.
1. Press and touch > Settings > My device tab.
2. Touch the OFF/ON switch to turn Power saving mode on, then touch Power saving
mode to set options:
 CPU power saving: Disable the maximum performance of the phone’s CPU (Central
Processing Unit).
 Screen power saving: Reduce the frame refresh rate and brightness level.
Note: Touch Learn about Power saving mode to view information about these settings.
Accessory
Configure your phone’s behavior when it is connected to an optional dock (not included).
1. Press and touch > Settings > My device tab.
2. Touch Accessory to configure settings:
 Dock sound: Play a sound when you insert and remove the phone from the dock.
 Audio output mode: Play audio through the dock speakers when the phone is
docked.
 Desk home screen display: Display the desk home screen when the phone is
docked.
 Automatic unlock: Flip the S View cover open to unlock the screen when the
secure lock is disabled and the phone is docked.
Settings 159