Samsung SCH-I920DAAVZW User Manual
Page 139
134
–
Tap New Outgoing Port to choose a device and set up a new
outgoing port.
• Dial Up Network Terminal: No configurable settings.
• Basic Printing: No configurable settings.
• File Transfer: Tap
Options
for these settings:
–
Tap Enable to write to enable/disable writing to your device.
–
Tap Shared Folder to choose a location on your device for sharing.
• Object Push: Tap
Options
for these settings:
–
Tap Enable to receive all Incoming to enable/disable automatic
receiving for incoming beams.
–
Tap Shared Folder to choose a location on your device for sharing.
• Human Interface Device: No configurable settings.
• Phonebook Access: No configurable settings.
9.
Tap Menu
➔
Device Info
for settings about your device:
• Tap
Device Name
to modify your device’s name, to be using during
pairing.
• View the
MAC
address, which is needed for some pairings.
•
Enable visibility
to other devices to put your device in discoverable
mode, visible to other searching Bluetooth devices.
• If in discoverable mode, tap
Turn off Visible Mode
to set a length of
time to remain discoverable. Choose from
Never
,
After 1 Minute
,
After 5 Minutes
, or
After 10 Minutes
.
Note: The Device Name that appears on the above screen can also be
changed via the Owner Information Settings. For more information, see
“Owner Information” on page 95.
Bluetooth Bonds
A bond is a relationship that you create between your Omnia II
and another Bluetooth-enabled device to exchange information in
a secure manner. Creating a bond involves entering the same
Passkey on the two devices sharing a bond.
Bonds are created only once between devices. Once a bond is
created between devices, the devices do not have to be
discoverable to exchange information; however, each device
must have its Bluetooth radio on.
Creating Bluetooth Bonds
Note: Make sure that the two devices are within range of one another and
that Bluetooth discoverable mode is enabled on both devices.
1.
Press the Main Menu key
, Main Menu 2
➔
Bluetooth
.
– or –
Press the Main Menu key
, then Settings
➔
Basic Settings tab
➔
Bluetooth Settings.
2.
Turn on Bluetooth by tapping the blue device icon.