American Power Conversion 250 A - Manual (Page 77)

InfraStruXure Power Generation System 67
How to Allow Easy Access to the ATS
Display Interface
The ATS comes with a Plexiglas cover plate that can be installed in the front door to protect against
access to the display interface. When installed, access to the interface requires opening the front door.
To attach the cover plate, peel off the paper strips on the top and bottom of the plate to expose the
adhesive. Press the plate into place from inside the door.
To remove the cover plate and gain ready access to the display interface, open the front door and
press firmly on the plate from outside the door as shown below. You may need to use a screwdriver or
other flat tool to pry the plate away from the inside of the door.