American Power Conversion 250 A - Manual (Page 59)

InfraStruXure Power Generation System 49
Communication Configuration
ATS Management Options
Overview
There are two options for managing your system. You can manage the ATS, along with the rest of
your InfraStruXure equipment, through the InfraStruXure Manager (APC LAN); or you can manage
your system through APC’s network management interfaces (User LAN).
InfraStruXure Manager
The InfraStruXure Manager is a rack-mount management device that coordinates the management
functions of APC InfraStruXure-Certified devices installed in your data center. It provides a single
interface to view and configure all APC InfraStruXure-Certified devices (see “Configuring the
InfraStruXure Manager” on page 50 for configuration instructions).
Network management interfaces
The control console and Web interfaces provide menus with options for managing your system (see
“Configuring the ATS Network Management Interface” on page 51 for configuration instructions).
The SNMP interface allows you to use an SNMP browser with the PowerNet
®
Management
Information Base (MIB) to manage your system (see “Configuring the ATS Network Management
Interface” on page 51 for configuration instructions).
See also
For more information about the InfraStruXure Manager, refer to the Installation and
Configuration Manual included with the InfraStruXure Manager.
See also
For more information about the internal user interfaces, refer to the InfraStruXure
Power Generation System’s on-line Network Management User’s Guide.
See also
To use the PowerNet MIB with an SNMP browser, refer to the PowerNet ® SNMP
Management Information Base (MIB) Reference Guide, which is provided on the
InfraStruXure Power Generation System’s Utility CD.