American Power Conversion 250 A - Manual (Page 57)

Config
InfraStruXure Power Generation System 47
Electrical Config
Factory Defaults
Manufacturer Data
System ID
Firmware Updates
Reset 100% Fuel Level
The following items are available on this menu:
Voltage Specifies the input voltage rating of the ATS.
Switch Rating Specifies the amperage rating of the ATS.
Frequency Specifies the frequency rating of the ATS.
DC Backup Specifies whether or not the ATS monitoring unit is receiving back-up power from
the generator battery.
Use this option on the Config screen to reset all ATS settings to their factory default values.
Use this option on the Config screen to display a scrollable list containing information about the ATS. This
information is useful when requesting service or product updates. The following information is displayed:
• Manufacturer Name
• Date of Manufacture
• Date of Calibration
• Hardware Revision
• Firmware Revision
• Serial Number
• Model Number
The following items are available on this menu:
System Name Set a unique name for your InfraStruXure Power Generation System.
Location Specify the physical location of the system in relation to your data center.
Contact Identify the person to notify concerning questions or problems with regard to the
system.
Use this option on the Config screen to download updated firmware to the ATS.
Use this option after the generator’s tank has been filled to reset the ATS to acknowledge a 100-percent fuel
level. The ATS can now begin calculating accurate fuel-consumption rates and run-time information.