Command ftp – Vaisala AWS330 User Manual
Page 229
Chapter 7 ___________________________________________________________ Troubleshooting
VAISALA ______________________________________________________________________ 227
Command ftp
FTP client functionality can be used from the QML logger command
shell to transfer files and to test the connection to an FTP server. The ftp
command syntax is
ftp
username] [-pass password] [-rst restart at] [-opt options]
Parameters for the ftp command are described in Table 64 below.
Table 64
Parameters for Command ftp
Parameter Use
get
Gets file from server
put
Puts file to server
test
Tests connection to server
source
Name of the source depending on
command, for example, a file on local
or remote system.
destination
Name of the destination, that is,
depending on command, a file on
local or remote system.
interface
Interface to use; the default value is
netif0.
user Username
to
use
pass Password
to
use
options
f = Force destination directory creation
on remote server, a = Append to file,
d = Write debug output
Examples of ftp command output are presented below:
/Ext > ftp test ftp.vaisala.com -user me -pass mypass
Opening interface...ok
Connecting ftp.vaisala.com...ok
/Ext > ftp put metawsaa.adc ftp.vaisala.com -user me -pass mypass
Opening interface...ok
Sent succesfully 116382 bytes