Vaisala AWS330 User Manual
Page 119
Chapter 5 __________________________________________ Software Configuration and Operation
VAISALA ______________________________________________________________________ 117
If AWS330 is connected to the Internet or other network where NTP
service is available, further timekeeping can be automated by configuring
the NTP client into use.
1011-016
Figure 66
Setting NTP Client Parameters
Table 22
NTP Parameters
Set Name
Parameter
Name
Use
NTP
interval
Interval [s] to check and adjust time. Once
per hour (3600) is the recommended
shortest period.
NTP
server1
NTP server to read the time from. For public
servers,
.
NTP
timetol
Time error tolerance [s] for adjusting the real
time clock. In other words, if error is equal to
or greater than this parameter, RTC is
adjusted to match the NTP server time.