Vaisala AWS330 - Manual (Page 169)

Chapter 6 ______________________________________________________________ Maintenance
VAISALA ______________________________________________________________________ 167
CHAPTER 6
MAINTENANCE
This chapter provides information that is needed in the basic maintenance
of AWS330.
Overall Checking
Check the mechanics and cabling for any damage and corrosion, and
repair if needed. Wipe off or remove excess dirt, dust, sand, or leaves.
- Check signal and main cables, connectors, and connections.
- Check gaskets of the enclosures.
- Check all grounding cables and lugs.
- Check mechanical assemblies, bolts, and nuts.
- Check the equipment for corrosion. Repair if needed.
CAUTION Do not open the enclosure under poor conditions, for example, during
rain or with dust in the air. In general, it is not advisable to repair sensors
in the field.
NOTE Use correct tools of good quality.