Vaisala AWS330 - Manual (Page 129)

Chapter 5 __________________________________________ Software Configuration and Operation
VAISALA ______________________________________________________________________ 127
FTP uses the following station parameters:
1011-023
Figure 75 Setting FTP Parameters
Table 29 FTP Transmission Parameters
Set Name Parameter Name Use
FTP
server Name or IP address for the FTP server
FTP user Username to login to the FTP server
FTP pass Password to login to the FTP server
NOTE QML logger uses passive mode FTP, which is less prone to be blocked
by a firewall.
To enable sending messages to FTP server, use the following parameters
described in Table 26 on page 121 and Table 27 on page 123:
- csv_to_ftp (1
- sms_to_ftp (1
- table_to_ftp (1
- alrmet_to_ftp
- alrtech_to_ftp
(1 You are allowed to select only one observation message type for FTP
transmission.