Vaisala AWS330 - Manual (Page 135)

Chapter 5 __________________________________________ Software Configuration and Operation
VAISALA ______________________________________________________________________ 133
Telemetry Parameters
Settings in the following sections are used to set telemetry parameters
depending on the type of telemetry device used (GSM, Ethernet) and the
selected protocol.
Connection Parameters
GSM Modem
Before starting to set up the GSM modem, you need to obtain a SIM
card.
NOTE Even if using a PIN code is optional, it is recommended that you use it to
protect the SIM from unauthorized use. Use a mobile phone to set the
PIN.
The following parameters are available for GSM modem:
1012-165
Figure 79 Setting GSM Modem Parameters
Table 33 GSM Modem Parameters
Set Name Parameter Name Use
GSM_Modem pin PIN code set to SIM card. Leave empty if
not used.
GSM_Modem smscentre Number for operator's SMS centre. (1
(1 Parameter is optional. Needed only if using SMS and the network does
not provide this information automatically.