Vaisala DMT340 - Manual (Page 100)

User's Guide _______________________________________________________________________
98 ___________________________________________________________________ M210704EN-G
Table 25 Other Commands
Command Description
? Output the information about the device
?? Output the information about the device in POLL-state
ALSEL Set display alarms
CON Set display contrast
CDATE Adjust the output date/set date when adjustment
enabled
CODE Display the order configuration code of the transmitter
CTEXT Display the adjustment information text/set information
text when adjustment enabled
DATE Set date.
DSEND Output the reading, also in poll mode.
ECHO Turn the serial interface echo ON/OFF
ERRS Display transmitter error messages
FIND All devices in POLL mode send their addresses
HELP List the currently available commands
LIGHT Set the display backlight mode
LOCK Lock the menu or disable the keypad
MODBUS View Modbus diagnostic counters
MODS View information about connected modules
MOL/MOLI View/set molecular weight parameter
PRES Set the value for pressure compensation
RESET Reset the device
TEST Self-diagnostics information
TIME Set time.
UNIT Display output units
VERS Display the software version information
XPRES Set pressure (temporarily)