DAVIS Energy EnviroMonitor: Console - Manual (Page 9)

Introduction to the Energy EnviroMonitor
Page 2 Energy EnviroMonitor Manual
• External Temperature Sensor
Enables you to measure and display outside temperature, and heating
and cooling degree-days.
Note: You may use EITHER the external temperature sensor, external temperature/humidity sen-
sor, or the stainless steel temperature probe.
• External Temperature/Humidity Sensor
Enables you to measure and display outside temperature, outside
humidity, dew-point, temperature-humidity index, normal and temper-
ature-humidity index cooling degree-days, and heating degree-days.
(See note in external temperature sensor section for restrictions.)
• Rain Collector
Enables you to measure and display daily and total rainfall and rate of
rainfall. Separate models measure rainfall in either 0.01-inch or 0.2-mm
increments. Optional Rain Collector Heater enables you to measure the
moisture content of snowfall or freezing rain.
• Solar Radiation Sensor
Enables you to measure and display solar irradiance and incident
energy.
• Stainless Steel Temperature Probe
Enables you to measure and outside temperature and growing degree-
days or soil temperature. Rugged stainless-steel construction makes sen-
sor ideally suited to measuring soil or water temperature. (See note in
external temperature sensor section for restrictions.)
O PTIONAL A CCESSORIES
The following accessories, designed for use with the Energy EM, are available
from your dealer or may be ordered directly from Davis Instruments.
• Energy WeatherLink ®
Logs data gathered by the Energy EM, downloads it to your PC, and
generates reports and graphical displays. Storage interval (1, 5, 10, 15, 30,
60, or 120 minutes) is set by the user. The data logger will store 16 hours
or 3, 7, 10, 21, 42, or 85 days worth of data depending on storage interval.
Windows
™ -compatible software enables you to analyze, plot, print, sort,
and summarize the data. Includes fuel customer management feature.
Automatically generates NOAA reports. Print and export degree-day
information totaled for the day and month.
• Sensor Mounting Arm
A single-location mounting option. The Sensor Mounting Arm includes
provisions for optimal mounting of all Davis sensors: anemometer, tem-
perature sensor (with Radiation Shield), solar radiation sensor, Rain Col-
lector Shelf, etc.