DAVIS Energy EnviroMonitor: Console - Manual (Page 51)

Using the Energy EnviroMonitor
Page 44 Energy EnviroMonitor Manual
H IGHS AND L OWS
The Energy EM stores highs/lows for many of its functions. The table con-
tained in “Highs and Lows” starting on page 13 lists all of the highs and lows
stored/displayed by the Energy EM. The procedure for displaying and clear-
ing highs and lows is the same for each high/low. The general procedure is
covered below.
S AMPLE H IGH /L OW D ISPLAYS
When viewing high wind speed, the direction of the high gust appears as a
steady (not flashing) diamond at one of the points.
Displaying Highs and Lows
1. Press the appropriate key as necessary to display the desired weather condition.
2. To view the high/low, press Recall.
The high/low reading appears on the right of the display. (If a function
stores/displays both a high and a low, the high reading appears first.)
3. To view the time at which the high/low occurred, watch the display without pressing a
key.
After approximately four seconds, the time at which the high/low occurred
will appear on the right of the display. As long as you do not press a key, the
Energy EM will continuously alternate between the high/low reading and
the time.