DAVIS Energy EnviroMonitor: Console - Manual (Page 28)

Cooling Degree-Days
Energy EnviroMonitor Manual Page 21
Setting Cooling Degree-Days Threshold
You may change the cooling degree-days threshold, if necessary.
1. Press COOL’G D-DAYS as necessary to display the cooling degree-days threshold.
C OOLING D EGREE - DAYS T HRESHOLD
2. Press UNITS as necessary to select the desired unit of measure.
3. Use ENTER to set the threshold to the desired temperature.
4. Press COOL’G D-DAYS to save the entry.
Clearing Daily Cooling Degree-Days Sum
You may clear the daily cooling degree-days sum or the daily T-H cooling
degree-days sum at any time to begin a new “daily” cooling degree-days total.
1. Press COOL’G D-DAYS as necessary to display the desired cooling degree-days sum.
2. Press and hold down CLEAR until the cooling degree-days sum resets to zero.
D AILY C OOLING D EGREE- D AYS C LEARED
Note: Clearing the daily cooling degree-days sum does not clear the daily T-H index degree-days sum
and vice-versa. You must clear each sum individually (or use AutoClear).