DAVIS Energy EnviroMonitor: Console - Manual (Page 40)

Rainfall
Energy EnviroMonitor Manual Page 33
R AINFALL
You may display the daily rainfall and the total rainfall on the right side of the
display. Whenever you view daily rainfall, the rate of rainfall appears on the
left side of the display. In addition, you may view a daily high rate of rainfall
along with the time at which it occurred. You may display rainfall in either
inches (in) or millimeters (mm). Rate of rainfall is displayed in inches per hour
(in/hr) or millimeters per hour (mm/hr).
Viewing Rainfall
1. To display “daily” rainfall, press RAIN.
The amount of daily rainfall appears on the right of the display. The current
rate of rainfall appears on the left of the display.
D AILY R AINFALL
The daily rainfall represents the amount of rainfall since the last time you (or
AutoClear) cleared daily rainfall. For instructions on clearing daily rainfall,
see “Clearing Daily and Total Rainfall” on page 35.
2. To display the total rainfall during the period, press RAIN again.
The total rainfall appears on the right of the display. The current rate of rain-
fall appears on the left of the display.
T OTAL R AINFALL
The total rainfall represents the amount of rainfall since the last time you
cleared total rainfall. For instructions on clearing total rainfall, see “Clearing
Daily and Total Rainfall” on page 35.
3. To display the status of the AutoClear function for daily rainfall and for the high rate of
rainfall, press RAIN again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 50 for
instructions.)
4. Continuing to press RAIN will cycle through the rain displays in a continuous loop.