beautypg.com

Selecting units of measure – DAVIS Energy EnviroMonitor: Console User Manual

Page 34

background image

Temperature and Apparent Temperature

Energy EnviroMonitor Manual

Page 27

4. To display the current inside temperature, press TEMP again.

The current inside temperature appears on the right of the display.

C

URRENT

I

NSIDE

T

EMPERATURE

5. To display the status of the AutoClear function for high and low outside temperature,

high T-H index, low wind chill, and high and low inside temperature (On/Off), press
TEMP again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 50.)

6. Continuing to press TEMP will cycle through the outside temperature, inside tempera-

ture, and T-H index displays in a continuous loop.

Selecting Units of Measure

To select the desired unit of measure, simply press UNITS while viewing
any of the outside temperature, inside temperature, and T-H index displays
(except AutoClear). As you press UNITS, the Energy EM alternates between
˚F and ˚C (and between 1˚ and 0.1˚ resolution if changing the units for out-
side or inside temperature) All temperature information (including degree-
days and dew-point) will appear in the units of measure you select.

T

YPICAL

U

NITS

OF

M

EASURE