DAVIS Energy EnviroMonitor: Console - Manual (Page 36)

Wind
Energy EnviroMonitor Manual Page 29
2. To display daily wind run, press WIND again.
The daily wind run appears on the right of the display.
D AILY W IND R UN
The daily wind run represents the total wind run since the last time you (or
AutoClear) cleared wind run. For instructions on clearing wind run, see
“Clearing Daily Wind Run” on page 30.
3. To display the average daily wind run during the period, press WIND again.
The average daily wind run appears on the right of the display.
A VERAGE D AILY W IND R UN
4. To display the wind direction in degrees, press WIND again.
The wind direction reading, to a resolution of 1˚, appears on the right of the
display.
W IND D IRECTION
5. To display the date on which the current period started and the number of days in the
period, press WIND again.
The date on which the period started appears on the right of the display. The
number of days in the period appears on the left of the display. To view a
typical period information display, see the “Period Information” illustration
on page 20.
6. To display the status of the AutoClear function for high wind speed and daily wind run,
press WIND again.
If the AutoClear function is enabled, the word On appears on the right of the dis-
play. If the AutoClear function is disabled, the word OFF appears on the right of
the display. (See “Enabling/Disabling AutoClear” on page 50 for instructions.)
7. Continuing to press WIND will cycle through the wind displays in a continuous loop.