DAVIS Rain Collector Shelf: GroWeather, EnviroMonitor, Weather Monitor & Wizard - Manual

Product # 7704
R
A I N
C
O L L E C T O R
S
H E L F
M
A N U A L
The Rain Collector Shelf provides a good mounting support for your Rain Col-
lector II. The Rain Collector Shelf is designed to be attached to Davis’ Sensor
Mounting Arm, and all necessary hardware is included to complete this instal-
lation. The Rain Collector Shelf may also be adapted, however, for other
mounting needs. This instruction manual is designed to take you step-by-step
through the process required to install and use your Rain Collector Shelf.
Please take the time to read through this manual before beginning the process.
C OMPONENTS
The Rain Collector Shelf includes the following components. Please make sure
you have all listed components before continuing.
Note: The Rain Collector Shelf includes all hardware necessary to mount the shelf onto Davis’ Sensor
Mounting Arm. If you plan to mount the Rain Collector Shelf without the Sensor Mounting Arm,
you will need to supply some extra hardware (see “Tools and Materials Needed” on page 2).
✦ Shelf
✦ Installation Hardware Kit
a. Eight #8-32 x 3/4"
(19 mm) Screws
b. Twelve #8 Flat
Washers
c. Eight #8 Split Lock
Washers
d. Eight #8-32 Hex
Nuts