DAVIS Radio Surge Protector - Manual

Product # 7861 & 7863
R
A D I O
S
U R G E
P
R O T E C T O R
F O R C E L L U L A R T E L E P H O N E M O D E M ,
S P R E A D - S P E C T R U M R A D I O M O D E M ,
A N D U H F R A D I O M O D E M
The Radio Surge Protector provides surge protection between any antenna
cable with BNC connector and the UHF radio modem (UHF-RM), spread-spec-
trum radio modem (SS-RM), or cellular telephone modem (CTM). The use of
the Radio Surge Protector is essential if the UHF-RM, SS-RM, or CTM is being
used in an area where lightning induced surges are a possibility.
Note: Davis recommends the use of the Radio Surge Protector for all wireless installations.
C OMPONENTS
The Radio Surge Protector comes with the following components. Please make
sure you have all listed components before continuing.
Radio
Surge
Protector
Ground Lug
Aluminum
Spacer
#10-32 x 1"
Machine Screw
Internal Tooth
Lock Washers
#10-32
Hex Nut
12" BNC Connector Cable
Included with #7863 (Radio
Surge Protector for Spread-Spectrum
and UHF) only
Ground Wire