DAVIS Energy EnviroMonitor: Console - Manual (Page 37)

Using the Energy EnviroMonitor
Page 30 Energy EnviroMonitor Manual
Selecting Units of Measure
To select the desired unit of measure, simply press UNITS while viewing any
the wind speed or wind run displays. As you press UNITS, the Energy EM
cycles through the available units of measure.
T YPICAL U NITS OF M EASURE
Displaying High Wind Speed
The Energy EM displays the high wind speed along with the time at which it
occurred and the direction of the high gust. For information on displaying and
clearing highs and lows, see “Highs and Lows” starting on page 44.
Clearing Daily Wind Run
You may clear the daily wind run total at any time to begin a new “daily” wind
run total. Daily wind run may also be reset once a day using AutoClear (see
“AutoClear” on page 12).
1. Press WIND as necessary to display the daily wind run sum.
2. Press and hold down CLEAR until the wind run total resets to zero.
D AILY W IND R UN C LEARED
Alarms
You may set a high alarm for wind speed. For information on displaying, set-
ting, and clearing alarms, see “Alarms” starting on page 46.