DAVIS Energy EnviroMonitor: Console - Manual (Page 39)

Using the Energy EnviroMonitor
Page 32 Energy EnviroMonitor Manual
4. To display the date on which the current period started and the number of days in the
period, press SUN again.
The date on which the period started appears on the right of the display. The
number of days in the period appears on the left of the display. To view a
typical period information display, see the “Period Information” illustration
on page 20.
5. To display the status of the AutoClear function for daily solar energy, press SUN again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 50 for
instructions.)
6. Continuing to press SUN will cycle through the solar radiation displays in a continuous
loop.
Clearing Daily Solar Energy
You may reset the daily solar energy total at any time to begin a new “daily”
solar energy total.
1. Press SUN as necessary to display the daily solar energy total.
2. Press and hold down CLEAR until the daily solar energy total resets to zero.
D AILY S OLAR E NERGY C LEARED