DAVIS Energy EnviroMonitor: Console - Manual (Page 50)

Time
Energy EnviroMonitor Manual Page 43
3. Press TIME to exit.
The Energy EM saves the AutoClear time. At the set time each day, the
Energy EM clears those functions for which AutoClear is enabled (See
“Enabling/Disabling AutoClear” on page 50).
Clearing Period Information/Starting a New Period
When you begin a new period, all information which is listed as being “over
the period” or “during the period” is cleared so new period totals may be accu-
mulated/calculated. See “Period” on page 11 for more information.
1. Press TIME as necessary to display the period information.
2. Press and hold down CLEAR.
As you hold down CLEAR, the display alternates between showing the
number of days in the period and the word ALL and showing zeros (0000) on
both sides of the display. This provides you ample warning that the
Energy EM is preparing to clear all period totals and begin a new period.
D ISPLAY A LTERNATION D URING P ERIOD C LEAR
3. To clear all period totals and begin a new period, hold down clear until the display
stops flashing and the period information display returns. Note that the number of
days in the current period resets to 0.
This indicates that the Energy EM has cleared all period totals and begun a
new period.