DAVIS Cable Coupler Kit - Manual

'DYLV ,QVWUXPHQWV 'LDEOR $YHQXH +D\ZDUG &$ 86$ ‡ ‡ ZZZGDYLVQHWFRP
®
1
Coupler Kit
(7957)
For Standard 4-Conductor
Cables
(7876-XXX)
The Coupler Kit (included with Standard 4-Conductor Cables) is used to connect the
extension cables to the sensor cables. It includes a cable coupler and waterproof crimp-
style splice connectors for making the connection as well as a protective shell in which
you may place the connection point.
Components
The Coupler Kit includes the following components. Please make sure you have all listed
components before continuing.
• Protective Shell (in two pieces)
• Cable Coupler
• 4 Screws, #4 x ½” (12.5 mm)
• 5 Splice Connectors
• 1 Cable Tie
Tools and Materials Needed
• Small Screwdriver
• Pliers
• Telephone Wire Stripper or Knife
• Hose Clamps or Conduit Clamps
• Cable Clips or Weather-Resistant Cable Ties