DAVIS Sensor Mounting Arm for GroWeather, EnviroMonitor, Weather Monitor & Wizard - Manual

Product # 7702
S
E N S O R
M
O U N T I N G
A
R M
The Sensor Mounting Arm provides an ideal mounting location for all of your
Davis weather station sensors. This manual is designed to take you through the
process required to assemble and mount the Sensor Mounting Arm. Please take
the time to read through this manual before beginning.
C OMPONENTS
The Sensor Mounting Arm includes the following components. Please make
sure you have all listed components before continuing.
✦ Sensor Arm
✦ Mounting Bracket
✦ 16.5-foot (5 m) Ground Wire
✦ Installation Hardware Kit
a. One 3/8” Cable Clamp
b. Four 3/16” Cable Clamps
c. Three 3/8” Cable Ties
d. Four 1/4” x 1-1/2”
(38 mm) Lag Screws
e. Eleven #8 Flat Washers
f. Six #8 Split Lock Washers
g. Six #8-32 Hex Nuts
h. Eight 1/4” Flat Washers
i. Eight 1/4” Split Lock
Washers
j. Eight 1/4”-20 Hex Nuts
k. Four 5/16” Flat Washers
l. Four 5/16” Split Lock
Washers
m. Four 5/16”-18 Hex Nuts