Telenav for Unlocked Supported Devices: Mobile Office - HTC Shift - Manual (Page 82)

82 Operating in SnapVUE™
3.13 Settings
To see all available settings in SnapVUE, tap Settings on the Home screen.
The table below describes about what you can do with SnapVUE settings.
Icon Description
Alarm Set alarm(s) at specified days and times of a week.
Backlight Set the backlight timeout and adjust brightness.
Certificate See information about certificates that are installed in
SnapVUE.
Clear Storage Tap this icon only when you need to remove all your
data and files from the memory and restore SnapVUE to factory default
settings.
Note
If you are playing music in Windows Vista®, the audio may be
muted for a short time during the clear storage process.
Comm Manager Easily toggle the modem and Direct Push functions on
or off. You can also turn on Flight Mode, if needed.
Connection Setup Configure the data connection, such as 3G, GPRS, or
EDGE connection, based on the detected or selected network operator.
Connections Manually set up several types of modem connections,
such as dial-up, 3G and GPRS, so that you can connect to the Internet
through one connection when another connection becomes unavailable.
Device Information See information about the SnapVUE firmware.
E-mail Account Settings Select which e-mail accounts you want to
display or hide from the Home screen. See Chapter 4 for details.
GPRS Setting Set the GPRS authentication method.