Telenav for Unlocked Supported Devices: Mobile Office - HTC Shift - Manual (Page 25)

Getting Started 25
Charge the battery
If you haven’t installed the battery yet, see “Installing the SIM Card and
Battery” in this chapter for instructions on installing the battery.
New batteries are shipped partially charged. Use the AC adapter to fully
charge the battery pack before using your Mobile Computer for the first
time. When charging, the Battery LED ( ) lights amber. The Battery LED
lights green when the battery is fully charged.
Note Only the supplied AC adapter should be used to charge the battery. Do not
remove the battery from the Mobile Computer while you are charging it
using the AC adapter.
Warning! To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire
or water.
• Do not expose to temperatures above 60 o C (140 o F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulation.
• Always turn off your Mobile Computer before installing or removing
the battery.
About battery time
Battery time is affected by many factors, including the power scheme
selected, how much you use wireless connections (Wi-Fi or 3G/2G), LCD
brightness setting, temperature of the operating environment, peripherals
attached to your Mobile Computer, and the applications, features or other
settings that you use.
Battery time estimates (approximations):
• Operating time: Up to 2 hours
• SnapVUE™ standby time
(Modem and Push e-mail enabled): Up to 53 hours
(Modem and Push e-mail disabled): Up to 10 days