Telenav for Unlocked Supported Devices: Mobile Office - HTC Shift - Manual (Page 29)

Getting Started 29
1.6 Inserting a Memory Card
On the right side of the Mobile Computer, there is an SDIO slot that mainly
serves as an SD memory card reader. If you have a digital camera’s SD card,
you can view and copy photos and other media from your SD card onto the
Mobile Computer.
When inserting your SD card, make sure to insert it with the contacts facing
down and the cut-off corner directed toward the slot.
Note To remove the SD card, press the card to pop it out of the slot.
1.7 Powering On the Mobile Computer for
the First Time
After inserting your SIM card and battery and charging the battery to full
charge, you can power on and set up your Mobile Computer.
Turn on the power
1. On the right side of your
Mobile Computer, slide the
POWER/HOLD switch to the
right for 1 to 2 seconds and
release.
2. The Mobile Computer starts up and runs the Power On Self Test
(POST). The POST is a series of built-in diagnostics performed by the
BIOS in the Mobile Computer when it is started.