American Fibertek SM10p-PoE - Manual (Page 84)

Rapid Spanning Tree
Group Configuration interface
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol
and provides for faster spanning tree convergence after a topology change. The system
also supports STP and the system will automatically detect the connected device that is
running STP or RSTP protocol.
RSTP - System Configuration
¢ User can view spanning tree information about the Root Bridge
¢ User can modify RSTP state. After modification, click Apply button
‹ RSTP mode: User must enable or disable RSTP function before configuring
the related parameters
‹ Priority (0-61440): A value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root. If the
value
changes, user must reboot the switch. The value must be multiple of
4096
according to the protocol standard rule
77