American Fibertek SM10p-PoE - Manual (Page 43)

snmp agent-mode G Select the agent mode switch(config)#snmp agent-mode
[v1v2c|v3|v1v2cv3] of SNMP v1v2cv3
snmp G Add SNMP community switch(config)#snmp
community-strings
[Community]
right
[RO/RW]
snmp-server host
string.
G Configure SNMP
community-strings public right
rw
switch(config)#snmp-server host
[IP address] server host information 192.168.1.50 community public
community
[Community-string]
trap-version
[v1|v2c]
snmpv3 context-name
[Context Name ]
snmpv3 user
[User Name]
group
[Group Name]
password
[Authentication
Password] [Privacy
Password]
snmpv3 access
context-name [Context
Name ]
group
[Group Name ]
security-level
[NoAuthNoPriv|AuthNoP
riv|AuthPriv]
and community string
G Configure the context
name
G Configure the
userprofile for
SNMPV3 agent.
Privacy password
could be empty.
G Configure the access
table of SNMPV3
agent
36
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
switch(config)#snmpv3
context-name Test
switch(config)#snmpv3 user
test01 group G1 password
AuthPW PrivPW
switch(config)#snmpv3 access
context-name Test group G1
security-level AuthPriv
match-rule Exact views V1 V1 V1