American Fibertek SM10p-PoE - Manual (Page 49)

SystemLog, SMTP and Event Commands Set
Commands Level Description Example
systemlog ip G Set System log server switch(config)# systemlog ip
[IP address] IP address. 192.168.1.100
systemlog mode
[client|server|both]
show systemlog
show systemlog
G Specified the log mode switch(config)# systemlog mode
both
E Displays system log. Switch>show systemlog
P Show system log client switch#show systemlog
& server information
no systemlog G Disable systemlog
functon
switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
smtp authentication
smtp account
[account]
smtp password
[password]
G Configure SMTP
server IP
G Enable SMTP
authentication
G Configure
authentication account
G Configure
authentication
password
switch(config)#smtp serverip
192.168.1.5
switch(config)#smtp
authentication
switch(config)#smtp account User
switch(config)#smtp password
smtp rcptemail G Configure Rcpt e-mail switch(config)#smtp rcptemail 1
[Index] [Email address]
show smtp
Address
P Show the information
of SMTP
[email protected]
switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
event
authentication-failure
[Systemlog|SMTP|Both]
G Set cold start event
type
G Set Authentication
failure event type
42
switch(config)#event
device-cold-start both
switch(config)#event
authentication-failure both