American Fibertek SM10p-PoE - Manual (Page 107)

Power over Ethernet
This segment shows the Power over Ethernet function.
PoE Status
¢ Maximum Power Available: Displays the maximum power supply in Watt.
¢ Actual Power Consumption: This column shows the real-time total power
consumption.
¢ Power Source: This column shows the power source which is supplying.
¢ Power Source 1 (AC): This column shows the supplying power value of power
source 1.
¢ Power Source 2 (AC+DC): This column shows the supplying power of power
source 2.
¢ Firmware Version: This column shows the PoE chip’s firmware version.
¢ AC Disconnect: Mark this check box to monitor the AC impedance on the port
terminals and removes power when the impedance rises above a certain value, for a
100