American Fibertek SM10p-PoE - Manual (Page 35)

[GroupID] [Port-list]
lacp
with LACP active.
[GroupID] :1~4
1 1-4 lacp workp 2
or
workp [Port-list]:Member port switch(config)#aggregator group
[Workport]
aggregator group
[GroupID] [Port-list]
nolacp
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
[Workport]: The
amount of work ports,
this value could not be
less than zero or be
large than the amount
of member ports.
G Assign a static trunk
group.
[GroupID] :1~4
2 1,4,3 lacp workp 3
switch(config)#aggregator group
1 2-4 nolacp
or
[Port-list]:Member port switch(config)#aggregator group
show aggregator
no aggregator lacp
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
P Show the information
of trunk group
G Disable the LACP
1 3,1,2 nolacp
switch#show aggregator 1
or
switch#show aggregator 2
or
switch#show aggregator 3
switch(config)#no aggreator lacp
[GroupID]
no aggregator group
[GroupID]
function of trunk group 1
G Remove a trunk group switch(config)#no aggreator
group 2
28