American Fibertek SM10p-PoE - Manual (Page 70)

Port Statistics
The following information provides the current port statistic information.
¢ Port: The port number.
¢ Type: Displays the current speed of connection to the port.
¢ Link: The status of linking—‘Up ’ or ‘ Down’.
¢ State: It’s set by Port Control. When the state is disabled, the port will not transmit
or receive any packet.
¢ Tx Good Packet: The counts of transmitting good packets via this port.
¢ Tx Bad Packet: The counts of transmitting bad packets (including undersize [less
than 64 bytes], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
¢ Rx Good Packet: The counts of receiving good packets via this port.
¢ Rx Bad Packet: The counts of receiving bad packets (including undersize [less than
64 bytes], oversize, CRC error, fragments and jabbers) via this port.
¢ Tx Abort Packet: The aborted packet while transmitting.
¢ Packet Collision: The counts of collision packet.
¢ Packet Dropped: The counts of dropped packet.
¢ Rx Bcast Packet: The counts of broadcast packet.
¢ Rx Mcast Packet: The counts of multicast packet.
¢ Click Clear button to clean all counts.
Port Statistics interface
63