American Fibertek SM10p-PoE - Manual (Page 46)

8021x enable
8021x system radiusip
G Use the 802.1x global switch(config)# 8021x enable
configuration
command to enable
802.1x protocols.
G Use the 802.1x system switch(config)# 8021x system
[IP address] radius IP global
configuration
command to change
the radius server IP.
radiusip 192.168.1.1
8021x system serverport G Use the 802.1x system switch(config)# 8021x system
[port ID] server port global
configuration
command to change
the radius server port
serverport 1815
8021x system G Use the 802.1x system switch(config)# 8021x system
accountport
[port ID]
account port global
configuration
command to change
the accounting port
accountport 1816
8021x system sharekey G Use the 802.1x system switch(config)# 8021x system
[ID] share key global
configuration
command to change
the shared key value.
sharekey 123456
8021x system nasid G Use the 802.1x system switch(config)# 8021x system
[words] nasid global
configuration
command to change
the NAS ID
39
nasid test1