American Fibertek SM10p-PoE - Manual (Page 51)

sntp daylight G Enable daylight saving switch(config)#sntp daylight
time, if SNTP function
is inactive, this
command can’t be
applied.
sntp daylight-period
[Start time] [End time]
sntp daylight-offset
[Minute]
G Set period of daylight
saving time, if SNTP
function is inactive,
this command can’t be
applied.
Parameter format:
[yyyymmdd-hh:mm]
G Set offset of daylight
saving time, if SNTP
function is inactive,
this command can’t be
applied.
switch(config)# sntp
daylight-period 20060101-01:01
20060202-01-01
switch(config)#sntp
daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP, if switch(config)#sntp ip 192.169.1.1
SNTP function is
inactive, this command
can’t be applied.
sntp timezone
[Timezone]
show sntp
G Set timezone index,
use ‘show sntp
timzezone’ command
to get more
information of index
number
P Show SNTP
information
switch(config)#sntp timezone 22
switch#show sntp
show sntp timezone
no sntp
P Show index number of switch#show sntp timezone
time zone list
G Disable SNTP function switch(config)#no sntp
44