American Fibertek SM10p-PoE - Manual (Page 40)

stp-admin-p2p
[Auto|True|False]
stp-admin-edge
[True|False]
a port priority that
is used when two
switches tie for
position as the root
switch.
I Admin P2P of STP
priority on this
interface.
I Admin Edge of STP
priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-p2p
Auto
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-edge
True
stp-admin-non-stp I Admin NonSTP of STP switch(config)#interface
[True|False] priority on this
interface.
fastEthernet 2
switch(config-if)#stp-admin-non-s
tp False
show spanning-tree
no spanning-tree
QOS Commands Set
E Displays a summary of switch>show spanning-tree
the spanning-tree
states.
G Disable spanning-tree. switch(config)#no spanning-tree
Commands
qos policy
[weighted-fair|strict]
Level Description
G Select QOS policy
scheduling
Example
switch(config)#qos policy
weighted-fair
qos prioritytype
[port-based|cos-only|tos
-only|cos-first|tos-first]
G Setting of QOS priority switch(config)#qos prioritytype
type
qos priority portbased
[Port]
[lowest|low|middle|high]
G Configure Port-based
Priority
33
switch(config)#qos priority
portbased 1 low