American Fibertek SM10p-PoE - Manual (Page 101)

802.1x System Configuration interface
802.1x Per Port Configuration
You can configure 802.1x authentication state for each port. The State provides Disable,
Accept, Reject and Authorize. Hit “Space” key to change the state value.
¢ Reject: The specified port is required to be held in the unauthorized state.
¢ Accept: The specified port is required to be held in the Authorized state.
¢ Authorized: The specified port is set to the Authorized or Unauthorized state
in accordance with the outcome of an authentication exchange between the supplicant
and the authentication server.
¢ Disable: When disabled, the specified port works without meeting 802.1x protocol.
¢ Click Apply .
94