Many of the topics in this section require access to the StoreOnce Command Line Interface (CLI).
They cannot be executed from the GUI. There is a separate StoreOnce CLI Reference Guide, which
you should use for more detailed information. However, a brief summary of how to access the
StoreOnce CLI is also included in this guide.

The user access is the same as the GUI, with the same roles. The Admin user has access to all
available CLI commands. The Operator user can view status and configurations but is not able to
make configuration changes.

To access the CLI

The StoreOnce CLI can be accessed:

•

Remotely: using a ssh session to the Management Console (ssh client applications, such as
PuTTY, are freely available from the internet). This is the normal access type.

ssh @

where the is one of the addresses

listed under IP address on the StoreOnce page .

•

If necessary, by a physical direct connection: connect a keyboard (USB or PS2, if available)
and VGA console to the appropriate ports on the rear of the StoreOnce Backup system. See
the appropriate HP StoreOnce Installation and Configuration Guide or HP StoreOnce
Maintenance and Service Guide for details.

NOTE:

When accessing the CLI directly, ignore any Linux dump logs. Press Enter to display

the CLI login prompt.

Accessing the CLI

167