HP StoreOnce Backup - Manual (Page 10)

Table 2 StoreOnce 2620, 4210, 4220, 4420, and 4430 models
Storage expansion Ports Description Product model
Not supported 2 x 1GbE ports A single server with four 1TB
disks HP StoreOnce 2620
Backup, BB852A
One 12–disk expansion
shelf 2 x 1GbE ports 2 x FC ports A single server with twelve
1TB disks (see note below) HP StoreOnce 4210
Backup, BB853A (iSCSI)
and BB854A (FC)
One 12–disk expansion
shelf 4 x 1GbE ports 2 x FC ports A single server with twelve
1TB disks HP StoreOnce 4220
Backup, BB855A
One 12–disk expansion
shelf 2 x 1GbE ports 2 x 10GbE
ports 2 x FC ports A single server with twelve
1TB disks HP StoreOnce 4420
Backup, BB856A
Up to three 12–disk
expansion shelves 2 x 1GbE ports 2 x 10GbE
ports 2 x FC ports A single server with twelve
2TB disks HP StoreOnce 4430
Backup, BB857A
NOTE: The HP StoreOnce 2620 and 4210i support VTL on iSCSI only. All other models support
VTL on iSCSI and Fibre Channel.
NOTE: The HP StoreOnce 4210 iSCSI/Fibre Channel product is fitted with 1TB disks (the same
as the HP StoreOnce 4220 Backup system). However, the configured available disk capacity of
the system is approximately 50% of this available disk capacity. The system cannot use the whole
capacity of the fitted disks because the product is not fitted with the required memory or processor
to make use of the additional capacity.
Using StoreOnce software version 3.11.00, you can add StoreOnce 6500 couplets to a StoreOnce
B6200 Backup system. This configuration is referred to as a mixed cluster configuration.
User types and user roles
User roles
Two roles define the permissions associated with a user; admin and user. Two default user accounts,
one for each role, are created automatically when the system is installed:
•
Administrator: Authorized users can create and edit management and StoreOnce functions
via the GUI and CLI. The default login and password are Admin and admin. The permissions
role of the Administrator is admin. You cannot delete this account, but you can and should
modify its password. Note that once the Admin account password has been changed, its
password cannot be changed back to admin as this password is not sufficiently complex. The
only way to revert that password back to admin is via the HPresetpassword account which is
only available on the local console of the device.
•
Operator: This account limits access to the GUI and CLI to monitoring and viewing. The default
login and password are Operator and operator. The permissions role of the Operator is user.
User types
After installation, an Administrator can configure additional user accounts and assign permissions
roles (admin or user) and passwords to these users. See the HP StoreOnce Backup system user
guide.
There are three types of user accounts:
•
Local User (with an administrator or user permissions role): Local users log in locally.
•
External User (with an administrator or user permissions role): User logs in as a domain user.
An external user is a Microsoft Active Directory user.
•
External Group (with an administrator or user permissions role): An external user is a Microsoft
Active Directory group. Members of the group log in as domain users. If after creating a group
10 Getting started