HP StoreOnce Backup User Manual
HP Storage
HP StoreOnce
2700, 4500, 4700, and 4900 Backup
system user guide
Abstract
This is the user guide for HP StoreOnce 2700, 4500, 4700 and 4900 Backup system and is intended for users who install,
operate and maintain the HP StoreOnce Backup system. It is also valid for the older HP StoreOnce 2620, 4210/4220 and
4420/4430 Backup models.
Always check
for the most current documentation, including localized versions (in PDF format)
for your product. (Search on Product Name and select the Product Manuals option.)
Refer to the Quick Specs on
for supported features for your model and the current status.
HP Part Number: BB903-90914
Published: July 2014
Edition: 10
Table of contents
Document Outline
- 2700, 4500, 4700, and 4900 Backup system user guide
- Contents
- 1 Getting started
- 2 StoreOnce functions
- 3 VTL (Virtual Tape Libraries) functions
- VTL Configuration page
- Libraries page
- Device Details tab
- Emulation types for tape devices
- Interface Information tab
- Active Connections tab
- Cartridges tab
- To create a cartridge (administrators only)
- To delete a cartridge (administrators only)
- To delete all or a range of cartridges (administrators only)
- To write protect a cartridge (administrators only)
- To edit maximum cartridge size (administrators only)
- To move or unload cartridges
- To edit barcodes in bulk
- Make Replication Target libraries visible to the host
- 4 NAS functions
- 5 Replication functions
- 6 HP StoreOnce Catalyst functions
- 7 Housekeeping function
- 8 StoreOnce reporting
- 9 Hardware Problem and Storage Reporting
- 10 Hardware
- 11 Remote Support
- 12 Access and Device Configuration
- 13 Events
- 14 Configuration save and restore process
- Configuration file
- Contents of the configuration text file
- Settings restored after automatic recovery
- Performing a configuration save
- Prerequisites for a configuration restore
- Restoring from the configuration zip file
- Performing a full configuration restore on a StoreOnce Backup system
- Deleting configuration files from an appliance
- 15 Storage management
- 16 Basic troubleshooting
- Accessing the CLI
- Password problems
- Pulling a Support Ticket
- Licensing problems
- Multiple users
- Connecting to the StoreOnce Backup system from the backup application
- Timeout problems with NAS CIFS shares
- Power off and power on
- NFS State handle error
- If backup or replication fails
- Catalyst troubleshooting
- Performance
- StoreOnce Backup system configuration problems
- Upgrade licenses
- 17 Advanced troubleshooting
- VLAN networking problems
- Software update process
- Firmware updates
- Using the 10Gb ports (HP StoreOnce 4900/4700/4500/44xx)
- Power off and power on
- Cannot authenticate an iSCSI session
- If the HP StoreOnce Backup system runs out of disk space
- Reduced performance using Data in Flight Encryption
- Cannot access a storage shelf (HP StoreOnce 4xxx Backup systems)
- Replacement of hardware
- Quick Restore ISO Image
- If complete data loss occurs
- 18 SNMP
- 19 Key Parameters
- 20 Support and other resources
- A Upgrading to StoreOnce software, version 3.11.x
- Previous networking models
- Network model with StoreOnce software version 3.11.0 and later
- VLAN subnets with HP StoreOnce Backup
- Updating to StoreOnce 3.11.0 software
- Worked example
- B Regulatory information
- Index